Xerox Phaser 5335 Installation Guide
7
Engli
s
h
5.
Gently lift the printer off the sheet feeders
and place it on a flat surface.
and place it on a flat surface.
Important
• If the sheet feeders are not removed from the printer
• If the sheet feeders are not removed from the printer
when you lift the printer, go back to Step 4.
• When lifting the printer, make sure to follow the
precautions stated in "
CAUTION" (P. 1).
Do not hold the printer by the paper tray slot.
6.
Remove the remaining clip that is inserted
into the slot on the sheet feeder.
into the slot on the sheet feeder.
7.
Insert the tray back into the printer. Make
sure to push the tray all the way in.
sure to push the tray all the way in.
Important
• When inserting the tray, be careful not to get your
• When inserting the tray, be careful not to get your
fingers caught between the tray and the printer.
8.
Plug in the power cord and switch the power on by pressing the power switch to the
<|> position.
<|> position.
The removal is now complete. Use the above procedure also when removing only one or
two sheet feeders.
two sheet feeders.