Xerox Phaser 5335 Installation Guide

Installing and Configuring the PostScript Driver on Macintosh

17

The printer is now ready for use on Mac OS X 10.3.

You can simply use the [Print] command on your software applications to send 
a print job to this printer.

Add this printer in [Printer List] window.

Check that the printer is on.

If you are using a USB connection, make sure your Macintosh and the printer 
is connected properly via USB cable.

Open the [Applications] folder, followed by the [Utilities] folder, and then 
double-click on [Printer Setup Utility] icon.

The [Printer List] window appears.

Follow the procedure below to add this printer to the [Printer List] window.

NOTE: Once the USB cable is connected and the printer is on, this printer will be 
added automatically to the list. If this happens, delete the printer manually and follow 
the procedure below to add the printer.

Click [Add] on the [Printer List] window.

Click [Default Browser] on the [Printer Browser] window.

Select this printer from the list. (Check if [USB] or [Bonjour] is shown under 
[Connection].)

Make sure this print driver is selected on the [Print Using] pop-up menu.

If it does not appear, select [Xerox] from the pop-up menu, and then select this 
printer from the list of model name that is displayed.

Click [Add].

Make sure this printer is added to the [Printer List] window.

Click [Add] on the [Printer List] window.

Click [IP Printer] on the [Printer Browser] window.

Select [Line Printer Daemon - LPD] on the [Protocol] pop-up menu and enter 
the IP address in [Address].

Make sure this print driver is selected on the [Print Using] pop-up menu.

If it does not appear, select [Xerox] from the pop-up menu, and then select this 

printer from the list of model name that is displayed.

Click [Add].