Xerox Phaser 5335 Installation Guide
26
Installing and Configuring the PostScript Driver on Macintosh
NOTE: This setting is available when either [Secure Print] or [Sample Set] is selected for
[Job Type].
[Job Type].
[Printer Features] window
This window appears when [Printer Features] is selected in "Switching items
displayed" (P. 20).
displayed" (P. 20).
Set up the individual features of the printer.
The displayed items vary depending on the options installed on the printer. Make
sure to set these items after configuring [Installable Options].
sure to set these items after configuring [Installable Options].
List of setting items
[Resolution]
Sets the print resolution to [l200dpi] or [600dpi]. [l200dpi] achieves better print
quality than [600dpi], but may take longer to print.
quality than [600dpi], but may take longer to print.
NOTE: On Macintosh OS X, [Resolution] appears when [Feature Sets] is set to [Set 1].
[Tray 1 (MPT) Feed Orientation]
Sets the orientation of the paper when printing from Tray 1 (Bypass). When loading
the paper with one of the short edges facing into Tray 1, select [Portrait]. When
loading the paper with one of the long edges facing into Tray 1, select [Landscape].
If the orientation can only be one way or the other depending on the paper size, the
actual orientation of the paper overrides this setting.
the paper with one of the short edges facing into Tray 1, select [Portrait]. When
loading the paper with one of the long edges facing into Tray 1, select [Landscape].
If the orientation can only be one way or the other depending on the paper size, the
actual orientation of the paper overrides this setting.
NOTE: On Macintosh OS X, [Tray 1 (MPT) Feed Orientation] appears when [Feature Sets]
is set to [Set 1].
is set to [Set 1].
[Collated]
Sets whether or not to collate multiple page documents.
NOTE: On Macintosh OS X, [Collated] appears when [Feature Sets] is set to [Set 1].
[Paper Type]
Sets the paper type to be use when printing. [Printer Default Type] uses the paper
type selected on the printer.
type selected on the printer.
NOTE: On Macintosh OS X, [Paper Type] appears when [Feature Sets] is set to [Set 1].
[Separator Paper Supply]
Sets the paper tray for separators when using the Transparency Separators
feature. Selecting [Auto Paper Select] uses the paper tray selected on the printer.
feature. Selecting [Auto Paper Select] uses the paper tray selected on the printer.
NOTE: On Macintosh OS X, [Separator Paper Supply] appears when [Feature Sets] is set
to [Set 1].
to [Set 1].
[Print on Separators]
Sets whether or not to print on separators. Selecting [Off] inserts blank separators.
Selecting [On] prints the same contents printed on transparencies to separators.
Selecting [On] prints the same contents printed on transparencies to separators.
NOTE: On Macintosh OS X, [Print on Separators] appears when [Feature Sets] is set to
[Set 1].
[Set 1].