Xerox Phaser 5335 User Guide

66

4 Paper

8. Push the tray all the way into the printer.

If the tray is extended, the extended portion 

sticks out from the back of the printer.

Important
• When inserting the tray, be careful not to get your 

fingers caught between the tray and the printer or 

another tray (if the optional sheet feeders are 

installed).

9. If the display shows a message asking you 

to set the paper type, set the paper type 

loaded in the tray.

Note
• When setting the paper type on the control panel, 

press the < > or < > button to select the items and 

then press the <OK/Eject><OK/Eject> button to 

confirm your selection. For information about the 

setting procedure on the control panel, refer to " 

When loading envelopes in Trays 2 - 5, be sure to load them in the correct orientations.

Note
• When loading envelopes in the tray, set the paper size dial to [

*

].

Load envelopes with the address side 

facing up and the edge with the flaps 

on your right. Make sure that the flaps 

are closed.

Load envelopes with the address side 

facing up and the edge with the flaps 

facing toward you. Make sure that the 

flaps are completely open.

Note
• When setting the margins on your 

application, add length of the flap 

(from the top edge to the fold line) to 

the margin on the flap side.

Load envelopes with the address side 

facing up and the edge with the flaps 

on your left. Make sure that the flaps 

are completely open.

Note
•

When setting the margins on your 

application, add one-half length of the 

flap (from the top edge to the fold line) 

to the margin on the flap side.