Xerox Phaser 840 Document
Installing the hard drive
3
Installing the hard drive
Static Electricity Precautions
■
Leave the printer plugged into its power outlet; this preserves a
ground path for static discharges.
ground path for static discharges.
■
Touch the printer’s bare metal frame often to discharge static electricity
from your body.
from your body.
■
Handle the circuit board by the edges only.
■
Do not lay the board on a metal surface.
■
Make the least possible movements to avoid generating static eletricity.
■
Avoid wearing wool, nylon, or polyester clothing; they generate static
eletricity.
eletricity.
Tools required
■
Phillips
®
screwdriver
Installing the hard drive
1.
Turn off the printer. Disconnect the rear panel cables if they obstruct
your work.
your work.
Z840-3-02