Xerox Phaser 6020 User Guide

Safety 

 

 Xerox

®

 Phaser

®

 6020 Color Printer 

13 

 

User Guide 

 

Operational Safety 

Your printer and supplies were designed and tested to meet strict safety requirements. These include 
safety agency examination, approval, and compliance with established environmental standards. 

Your attention to the following safety guidelines helps to ensure the continued, safe operation of your 
printer. 

 

Operational Guidelines 

 

Do not remove any trays while the printer is printing. 

 

Do not open the doors when the printer is printing. 

 

Do not move the printer while is printing. 

 

Keep hands, hair, neckties, and so on away from the exit and feed rollers. 

 

Covers, which require tools for removal, protect the hazard areas within the printer. Do not remove 
the protective covers. 

 

Do not override any electrical or mechanical interlock devices. 

 

Do not attempt to remove paper that is jammed deeply inside the product. Switch off the product 
promptly and contact your local Xerox representative. 

 

 

The metallic surfaces in the fuser area are hot. Always use caution when removing paper 

jams from this area and avoid touching any metallic surfaces. 

 

 

Ozone Release 

This printer produces ozone during normal operation. The amount of ozone produced is dependent on 
copy volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone. 
Install the printer in a well-ventilated room. 

For more information in the United States and Canada, go to 

www.xerox.com/environment

. In other 

markets, please contact your local Xerox representative or go to 

www.xerox.com/environment_europe

.