Xerox Phaser 4622 Administrator's Guide

Network Installation

Phaser 4622
System Administrator Guide

14

Network PING Test

Ping is a computer network administration utility used to test whether a particular host is reachable 
across an Internet Protocol (IP) network and to measure the round-trip time for packets sent from the 
local host to a destination computer, including the local host's own interfaces.

1.

Press the Menu button on the machine and select Tools.

2.

Enter the Administrator’s Password. The default is 1111 and press the OK button

3.

Select Setup and press the OK button.

4.

Select Network Settings and press the OK button.

5.

Select Network Ping Test and press the OK button.

6.

Select either IPv4 Address, IPv6 Address or Host Name and press the OK button.

7.

Enter the Address to ping using the alphanumeric keypad and press the OK button.

8.

The screen displays pinging and will display, in milliseconds, the time taken for ping packets to be 
returned.

Note 

Press the OK button to cancel the Ping Test.

9.

If the Packets Received is greater than zero then network connectivity has been established.

10. On the display, scroll down to Exit and press the OK button.