Xerox Phaser 4622 Administrator's Guide
Network Installation
Phaser 4622
System Administrator Guide
35
Dynamic Addressing
Procedure
IMPORTANT
Click on BOOTP in step 9.
Create the Print Queue
24. Follow the steps above in
Create the Print Queue
on page 34.
Linux LPRng
Static Addressing
Information Checklist
Before starting the Installation procedure, please ensure that the following items are available and/or
the tasks have been performed:
the tasks have been performed:
1.
Linux operating system that supports PrintTool.
Note
Not all distributions of Linux support PrintTool.
Procedure
1.
Information Checklist
on page 15.
Create the Print Queue
1.
Open the LPRngTool from the Linux Client.
2.
Click on the Add.
3.
In the Names area, enter a name for your print queue.
4.
The spool directory is the directory where print jobs are stored and is a subdirectory of
/var/spool/lpd. Add the name of the print queue to the end of the subdirectory path.
/var/spool/lpd. Add the name of the print queue to the end of the subdirectory path.
5.
In the Hostname/IP of Printer area, enter the hostname or IP Address of the Xerox machine.
6.
Click on OK.
7.
Click on Exit to close the program.
8.
To allow access to the printer, edit the /etc/hosts table to list the client system.
9.
Edit and create the /etc/hosts.lpd file to list the client system.
Dynamic Addressing
Procedure
IMPORTANT
Follow the steps on page 16, then return to this page.
Click on BOOTP in step 9.
10. Follow the steps above in Create the Print Queue.