Xerox Phaser 5500 User Guide

■

Do not block or cover the slots and openings on the printer. The printer may overheat 
without adequate ventilation.

■

For optimum performance, use the printer at elevations below 3,000 m (11,480 ft.).

■

Do not place the printer near a heat source.

■

Do not place the printer in direct sunlight.

■

Do not place the printer in line with the cold air flow from an air conditioning system.

■

Place the printer on a level, solid non-vibrating surface with adequate strength for the 
weight of the printer. It should be within 2° of horizontal with all four feet in solid contact 
with the surface. The base printer weight without any packaging materials is 
approximately 41 kg (90 lbs.).

■

Use the supplies specifically designed for your printer. The use of unsuitable materials 
may cause poor performance and a possible safety hazard.

■

Follow all warnings and instructions marked on, or supplied with, the printer, options and 
supplies.

■

Always use two people to lift the printer.

■

Always turn off the printer using the power switch and unplug all cables and cords.

■

Always lift the printer from the designated lift points.

■

Do not place any food or liquids on the printer.

■

Failure to repackage the printer properly for shipment can result in damage to the printer 
not covered by the warranty, service agreement, or Total Satisfaction Guarantee. 

■

Damage to the printer caused by improper moving is not covered by the Xerox warranty, 
service agreement, or Total Satisfaction Guarantee. 

The Total Satisfaction Guarantee is available in the United States and Canada. Coverage 
may vary outside these areas; please contact your local representative for details.

5500-267