Xerox Phaser 540 Leaflet
Print-quality modes
Fast
The default setting, produces the fastest output at 300 x 300 dpi,
continuous-tone: 3.5 pages per minute. When printing raster image data
(photographic-quality or continuous-tone), this mode provides excellent
output with finer color gradation than
(photographic-quality or continuous-tone), this mode provides excellent
output with finer color gradation than
Standard
mode.
Standard
The default setting, at 600 x 600 dpi, bi-level. This is the best
general-purpose mode for full color printing. This selection produces about
1.8 pages per minute, depending on the size and complexity of the image.
You can get faster throughput with more memory loaded.
1.8 pages per minute, depending on the size and complexity of the image.
You can get faster throughput with more memory loaded.
Enhanced
This mode produces the highest quality color prints at
600 x 600 dpi, continuous tone. It provides more detail and clarity in
scanned images and prints about 1.8 pages per minute. This print-quality
mode requires an additional 16 Mbytes of RAM be installed (for a total of
36 Mbytes).
scanned images and prints about 1.8 pages per minute. This print-quality
mode requires an additional 16 Mbytes of RAM be installed (for a total of
36 Mbytes).
Presentation
This mode is suitable for creating presentation materials such
as overhead transparencies or presentation handouts with a color sweep in
the background. It uses a custom halftone that produces uniform color in
shaded area fills.
the background. It uses a custom halftone that produces uniform color in
shaded area fills.
Note
If you select
Enhanced
mode but do not have the required
36 Mbytes of memory installed (1 SIMM), the output matches
Standard
mode. You must have the additional memory installed
to achieve the
Enhanced
mode output quality.
Source: 070-8602-00 C3