Xerox Phaser 480 Leaflet
Enabling/disabling the startup page
When you receive your printer from Tektronix, the startup page is disabled.
However, when you want information such as the printer name, the number
of pages printed, or available ports, you can enable the startup page. The
Phaser 480X CD-ROM and diskettes include utilities for PCs (
However, when you want information such as the printer name, the number
of pages printed, or available ports, you can enable the startup page. The
Phaser 480X CD-ROM and diskettes include utilities for PCs (
STARTPG.PS
and
NOSTRTPG.PS
) and for Macintoshes (
LaserWriter Utility
).
Even if the startup page is enabled, you can power-up or reset your printer
without printing a startup page. To do this, pull out the paper tray before
power-up or reset; when the
without printing a startup page. To do this, pull out the paper tray before
power-up or reset; when the
READY
light stops blinking, push the paper
tray back into the printer. The printer will be ready for printing, but will
have bypassed the startup page.
have bypassed the startup page.