Xerox Phaser 480 Leaflet

 

Follow these steps to feed a single sheet of media into the printer.  The 
manual feed option is selected through the Windows and Macintosh drivers.  
Typically, you would use manual feed when one of these conditions exist:

 

■

 

Paper is loaded in the paper tray and you want to print a 
transparency 

 

e.

 

■

 

Transparencies are loaded in the tray and you want to print on 
paper 

 

.

 

Make sure that the media you want to manually feed is the same 
size as the media in the paper tray.  If it is not, reset the size on the 
paper tray to accommodate the single sheet of paper or 
transparency.

 

Issue the print command on your computer.  In the drivers, select 

 

 under 

 

.  The 

 

 indicator blinks 

for 60 seconds.

 

Place the single sheet, 

 

, on the paper tray cover 

and slide it in until it stops.  If the paper tray is empty, the printer 
immediately picks the single sheet.  If the paper tray is not empty, 
the printer waits for the 

 

 indicator to stop blinking, then 

picks the single sheet.

 

Source:  070-9237-00  C3

8849-56