Xerox Phaser 780 Tabloid Leaflet

■

Plus Feature Set

■

Enable the feature in the printer’s front panel

■

Select Check Print in the driver software (see page 11).

When printing multiple pages through the driver  (either multiple copies of a single 
page or a multiple-page file),  select Check Print to preview the first page of the job 
before proceeding with the remainder of the job; this feature is useful when printing 
a large job.

Access to Check Print from the driver is enabled and disabled in the printer’s front 
panel.  You can also set the timeout in the front panel (timeout is the amount of time 
the printer waits after sending the first page of a file before it continues with the 
remainder of the job).

The factory default for Check Print is “disabled”; the default timeout is 5 minutes.  
Follow these instructions to enable Check Print in the front panel, reset the timeout,  
and select the option in the printer driver.

At the front panel Ready message, press  

. 

Press the right arrow button until the display reads 

Printer Defaults

.

Press 

.

Then press the right arrow button until the following message 

appears: 

Press 

; the following message appears, where the asterisk (*) indicates 

the current setting: 

 Press the right arrow button; the following message appears: 

Press 

.

Change the timeout (the amount of time the printer pauses before 
completing the print job):  When the front panel displays 

Printer 

Defaults/Check Print Timeout, 

press 

.  

Printer Defaults

Check Print: Off

Menu

Check Print

*Off

Select

Check Print

On

Select