Xerox Phaser 780 Tabloid Leaflet

From the printer’s CD-ROM, run setup.exe.  Select Custom Install.  Select 
Printer Utilities.

From your computer’s hard disk, open the PHSRTOOL directory.  Open the 
PHSR780 subdirectory.  

Select the utility file you want to send to the printer, for example RESET.PS.

From the File menu, select Copy; the Copy dialog box appears with the 
utility file you selected listed in the From field.

In the To field, type the port your printer is connected to.  For example, 
type  LPT1: for a parallel port connection.  Click OK.

If the Confirm File Replace dialog box appears, click Yes to continue; the 
file is downloaded to the printer.

If your printer is connected to an optional Novell NetWare or TCP/IP network, 
follow the instructions provided with your network software.

 

From the printer’s CD-ROM, run setup.exe.  Select Custom Install.  Select 
Printer Utilities.

Click Start in the task bar on your screen.  

In the menu that appears, select Programs.  

Select MS-DOS Prompt.  

■

Change directory to the PHSRTOOL directory.

■

If your printer is connected to the parallel (LPT) port, type the 
following command (where x is 1, 2, or 3): 

■

If your printer is connected to an optional Novell NetWare or TCP/IP 
network, follow the instructions provided with your network software.