Xerox Phaser 780 Tabloid Leaflet
Copyright
©
1998 by Tektronix, Inc. All rights reserved.
075-0351-AA
Instruction Sheet
Replacing the pick rollers — P.N. 118-9717-0X
For assistance while replacing the pick rollers, contact you local Tektronix
representative. In the U.S. and Canada, call 1-800-835-6100.
representative. In the U.S. and Canada, call 1-800-835-6100.
1.
Turn off the printer. Remove Tray 1 from the printer.
2.
Open the paper feeder drawer.
3.
Reach in through the empty paper feeder cavity and spread the plastic
arms of the front pick roller as you lift the roller off of the shaft.
arms of the front pick roller as you lift the roller off of the shaft.
4.
Reach in through the empty paper feeder cavity and spread the plastic
arms of the rear pick roller as you lift the roller off of the shaft.
arms of the rear pick roller as you lift the roller off of the shaft.
Reverse these steps to install the pick rollers. When installing the pick rollers, be
sure to line up the locating pin of each roller with its hole in the feed shaft. Also,
be sure the arrow embossed on the pick roller points into the printer.
sure to line up the locating pin of each roller with its hole in the feed shaft. Also,
be sure the arrow embossed on the pick roller points into the printer.
780-5-12
Locating pin
Phaser
®
780