Xerox Phaser 750 Installation Guide
PhaserShare Networking Manual
13
Windows NT (non-Intel computers)
Add the printer
1.
Log in as Administrator or a user with administrator privileges.
2.
Click Start, Settings, and Printers.
3.
In the Printers dialog box, double-click Add Printer.
■
If you intend to do your printer management from this computer, click My
Computer. The rest of this procedure applies when you click My Computer.
Computer. The rest of this procedure applies when you click My Computer.
■
If you intend to do your printer management from another computer, click
Network Print Server. In this case, you need only enter the printer’s name in the
Printer field and click OK. The rest of this procedure does not apply.
Network Print Server. In this case, you need only enter the printer’s name in the
Printer field and click OK. The rest of this procedure does not apply.
4.
Click Next.
5.
If the printer is connected directly to the computer, select the port the printer is
connected to:
connected to:
a.
LPTx is for a parallel-printer connection.
b.
COM is for a serial-connected printer.
6.
If the printer is connected to a network, click Add Port. Tektronix printers support two
types of network ports, LPR and AppleTalk. The next topic covers LPR ports; for
information on AppleTalk ports, see Creating an AppleTalk port on page 14.
types of network ports, LPR and AppleTalk. The next topic covers LPR ports; for
information on AppleTalk ports, see Creating an AppleTalk port on page 14.
Creating an LPR port
1.
To connect via TCP/IP, double-click LPR Port in the Printer Ports dialog box. If LPR
Port is not listed in this box, the Microsoft TCP/IP Printing Service must be installed
on the NT machine:
Port is not listed in this box, the Microsoft TCP/IP Printing Service must be installed
on the NT machine:
a.
Click Start, Settings, Control Panel, and Network.
b.
Click Services, then click Add.
c.
Select Microsoft TCP/IP Printing, then click OK and install this service. The
original Windows NT distribution CD-ROM is needed during installation.
original Windows NT distribution CD-ROM is needed during installation.
2.
In the Add LPR compatible printer dialog box, enter the printer's IP address or DNS
name in the box labeled Name or address of server providing lpd. In the box marked
Name of printer or print queue on that server,
name in the box labeled Name or address of server providing lpd. In the box marked
Name of printer or print queue on that server,
enter PS or AUTO in uppercase. Click
OK.
3.
When returned to the Printer Ports box, click Close.
4.
At the Add Printer Wizard dialog box, click the box next to this new port; a check mark is
added. Click Next.
added. Click Next.
Note
The TCP/IP protocol must also be installed on the server. Click the Protocol
tab to verify if it is installed. See your Windows NT documentation for
details. Reboot Windows NT after installing TCP/IP.
tab to verify if it is installed. See your Windows NT documentation for
details. Reboot Windows NT after installing TCP/IP.