Xerox Phaser 140 User Guide

■

Make sure that the printer is turned on.  Make sure that the front 
panel displays ready.  Make sure that the cables are correctly 
attached.

■

Check the termination (refer to the documentation for your 
Ethernet adapter or LocalTalk connector for information on 
termination).

■

Reset the printer by turning it off, then on again.

■

Make sure that you have the correct zone selected in the Chooser 
before looking for the printer's name in the list of printers.  If you 
have changed the printer's name, make sure that you have given it 
a unique name (not the same as any other printer in the zone).  If 
two printers in the same zone are given the same name, one of the 
names will appear in the Chooser with a sufÞx added.

To verify the printerÕs name, print the conÞguration page (see 
ÒPrinting the conÞguration pageÓ on page 6-17).  The 
conÞguration page reports the printerÕs name and other useful 
information.