Xerox Phaser 140 User Guide
Getting Set Up
2
User Manual
2-27
Checking the printhead
Print the printhead test pattern to check for clogged ink jets:
1.
Press the down (
ß) arrow key until the front panel displays this
message:
CLEAN HEADS
2.
Press the right (
Þ) arrow key until the front panel displays this
message:
print head test
3.
Press the SELECT button. The printer prints the head test pattern:
4.
Inspect the test pattern. There should be four horizontal lines
between each pair of vertical lines. If any of the horizontal lines is
missing, clean the ink jets as described under ÒCleaning the ink jetsÓ on page 4-10.
between each pair of vertical lines. If any of the horizontal lines is
missing, clean the ink jets as described under ÒCleaning the ink jetsÓ on page 4-10.
5.
Return the printer to normal operation:
a.
Press the right (
Þ) arrow key until the front panel displays
this message:
quit menu
b.
Press the SELECT button; the front panel displays this message:
ready
SELECT
(Black)
(Cyan)
(Magenta)
(Yellow)
9069-31