Xerox Phaser 340 User Guide

If you are using QuickDraw GX and System 7.5, you can print 
the color charts from the Tektronix Phaser 340 GX printer driver; 
see page 2-24Downloading printer utilities for instructions.   

Install the samplers and utility files from either the Phaser 340 
CD-ROM or the Printer Software for Macintosh diskette; see 
page 2-2Installing the printer’s software for details.

Select the appropriate printer in the Chooser.  

Decide which color correction you need to use; see page 7-6 for 
details.  

If you are selecting a color correction from the printer’s front 
panel, refer to the Phaser 340 Color Printer User Manual for 
instructions on using the printer’s front panel.

Locate the LaserWriter Utility in the PhaserTools folder on your 
hard disk, and double–click its icon to start the application.  

Choose Download PostScript File from the Utilities menu.  

Select a color correction file from the list, then click Open.  
(These files were installed in the Phaser 340 Utilities folder 
inside the PhaserTools folder.)

At the prompt  Save PostScript output as: you are 
asked for a file name for saving printer output.  Use either the 
default name given in the edit box or type a new name.  
Click Save to send the file to the printer.

If no output is returned by the printer, the LaserWriter Utility 
displays a dialog box; click OK to continue.