Xerox Phaser 340 User Guide
A
Modifying Printer Operations
A-4
Phaser 340 Drivers and Utilities
Enabling and disabling the startup page
You can choose to have a startup page print each time the printer is turned
on or reset, or you can disable the startup page.
on or reset, or you can disable the startup page.
Use the following files for your computer type.
Note
You can also perform this procedure from the printer’s front
panel; refer to the Phaser 340 Color Printer User Manual for
instructions.
panel; refer to the Phaser 340 Color Printer User Manual for
instructions.
Macintosh users
Note
If you are using QuickDraw GX and System Software 7.5, you
can use the Tektronix Phaser 340 GX driver to enable and disable
the startup page; refer to page 2-24Downloading printer utilities
for instructions.
can use the Tektronix Phaser 340 GX driver to enable and disable
the startup page; refer to page 2-24Downloading printer utilities
for instructions.
1.
Install the utility files from either the Phaser 340 CD-ROM or the
Printer Software for Macintosh diskette; refer to page 2-2Installing
the printer’s software for instructions.
Printer Software for Macintosh diskette; refer to page 2-2Installing
the printer’s software for instructions.
2.
Select the appropriate printer in the Chooser.
3.
Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double–click its icon to start the application.
disk, and double–click its icon to start the application.
4.
Choose Set Startup Page from the Utilities menu.
5.
Select either the on or off button, then click OK.
Macintosh file name
PC file name
LaserWriter Utility
NOSTRTPG.PS
STARTPG.PS
STARTPG.PS