Xerox Phaser 340 User Guide
Using SCSI Hard Disks
B
Printing Reference
B-7
Enabling and disabling SysStart Job execution
The Set SysStart Job (SYSTART.PS) file enables automatic execution of a file
named SysStart (if one is found) on a hard disk connected to the printer’s
SCSI port, each time the printer is turned on or reset. The SysStart job is
similar to an Init file; it executes automatically each time the printer is
turned on.
named SysStart (if one is found) on a hard disk connected to the printer’s
SCSI port, each time the printer is turned on or reset. The SysStart job is
similar to an Init file; it executes automatically each time the printer is
turned on.
Use the following files for your computer type:
Note
You can also control SysStart Job execution from the printer’s
front panel using the SCSI Startup Mode option in the Printer
Defaults menu. See the Phaser 340 Color Printer User
Manual for instructions on using the printer’s front panel.
front panel using the SCSI Startup Mode option in the Printer
Defaults menu. See the Phaser 340 Color Printer User
Manual for instructions on using the printer’s front panel.
Macintosh file name
PC file name
Set SysStart Job
No SysStart Job and
LaserWriter Utility
No SysStart Job and
LaserWriter Utility
SYSTART.PS
NOSYSTRT.PS
NOSYSTRT.PS