Xerox Phaser 1235 Installation Guide

21.

Send a print job to the printer.

22.

Check the print job for print-quality. If print-quality problems 
exist, use the print-quality section of your printer’s Advanced 

Features and Troubleshooting Manual to correct the problem.

23.

If your print job did not print, see the Troubleshooting section for 
your operating system in the Technical Information Guide to 
correct the problem.

Note

Printers connected to a Windows NT network with TCP/IP 
protocol enabled can use a web browser to monitor and 
configure your printer. Refer to the section in this document 
entitled Internet Printer Services.

Note

For installing or managing multiple printers on a Windows 
NT network with TCP/IP protocol enabled, you can use the 
Xerox CentreWare MC snap-in to Microsoft Management 
Console. Refer to the Xerox CentreWare MC User Guide.

Quick install steps (AppleTalk protocol)

1.

At the Desktop, right-mouse-click the Network Neighborhood 
icon and select Properties.

2.

Click the Protocols tab and verify that the AppleTalk protocol has 
been loaded.

3.

If the AppleTalk software is not present, install it using the 
documentation provided by Microsoft. Then return to this 
document.

4.

Open the Control Panel and double-click the Printers icon.

5.

Double-click Add Printer; the Add Printer Wizard starts.

6.

Verify that My Computer is selected and click Next>.

7.

Click Add Port.

8.

Select the AppleTalk Printing Devices and click New Port.

9.

Click Ethernet and select the device.

10.

Choose your printer device from the list, then click OK.