Xerox Phaser 1235 Leaflet

Un-LED Bar Missing

[U18-Yellow LED Bar 
Missing]
[U19-Magenta LED Bar 
Missing]
[U20-Cyan LED Bar 
Missing]
[U21-Black LED Bar 
Missing]

Fault

The LED bar is either missing or requires reseating 

to be recognized by the printer. Turn off the 

printer, wait 15 seconds, then turn on the printer. 

If the problem persists, check the support links at 

www.xerox.com/officeprinting/1235support.

Un-Drum Error

[U26-Yellow Drum Error]
[U27-Magenta Drum Error]
[U28-Cyan Drum Error]
[U29-Black Drum Error]

Fault

The imaging drum is either missing or requires 

reseating to be recognized by the printer. Turn off 

the printer, make sure the imaging drum is 

properly installed and turn on the printer. If the 

problem persists, install a new imaging drum. For 

further assistance, visit the support links at 

www.xerox.com/officeprinting/1235support.

Wn-Toner Low

[W1-Yellow Toner Low]
[W2-Magenta Toner Low]
[W3-Cyan Toner Low]
[W4-Black Toner Low]

Attention

The level of toner in the toner cartridge is low. 

The toner cartridge should be replaced soon, as it 

is near its end of life. Printing can continue until 

the toner cartridge is empty; however, some 

degradation of image quality may occur. The 

message remains until interrupted by other 

messages or until the toner cartridge is replaced.

Un-Toner Missing

[U22-Yellow Toner 
Missing]
[U23-Magenta Toner 
Missing]
[U24-Cyan Toner Missing]
[U25-Black Toner 
Missing]

Fault

The toner is either missing or requires reseating to 

be recognized by the printer. Turn off the printer, 

wait 15 seconds, then turn on the printer. If the 

problem persists, check the support links at

www.xerox.com/officeprinting/1235support.

W5-Transfer Belt Near End 
Of Life

Attention

The transfer belt is near its end of life. Printing can 

continue until the printer determines that the 

transfer belt is at its end of life; however, some 

degradation of image quality may occur. The 

message remains until interrupted by other 

messages or until the transfer belt is replaced.

Printer Management Status Messages (cont'd.)

Message

Type

Explanation/Corrective Action