Xerox Phaser 3400 Installation Guide

Remove the cartridge
from the printer and pack
it into its plastic bag.

Place the bottom cushion in the box with the
arrow mark on the bottom of the cushion
facing front. Then place the printer in the box.

Insert the packed cartridge in
place as shown in the figure
below.

Insert the power cord in
place as shown in the
figure below.

Close the cover then
tape the box. 

Insert the top cushion in the box with the
arrow mark on the cushion facing front.  

Cover the printer
with its plastic
bag.

Arrow mark

Observe the

cartridge

orientation.

Position the
front of the
printer above
the arrow mark.

Bottom 
cushion

Top cushion

Flip it down to
hold the cartridge
after the cartridge
is in place.

Cartridge

Arrow mark