Xerox Phaser 3330 Administrator's Guide

Initial Setup

Xerox

Phaser

3330 Printer

System Administrator Guide

Accessing Administration and

Configuration Settings

You can access the administration and configuration settings from the control panel or from the

Properties tab in Xerox

CentreWare

Internet Services. The control panel consists of a display and

buttons that you press to control the functions available on the printer. Xerox

CentreWare

Internet

Services is the administration and configuration software installed on the embedded Web server in the

printer. It allows you to configure and administer the printer from a Web browser.

The administrator password is required when accessing locked settings in Xerox

CentreWare

Internet

Services or at the control panel. Most printer models have a default configuration that restricts access

to some settings. Access is restricted for settings on the Properties tab in Xerox

CentreWare

Internet

Services, and settings at the control panel.

Accessing the Control Panel as a System Administrator

At the printer control panel, press the Menu button.

Use the arrow buttons to navigate through the menus.

If your menu selection is locked, use the arrow buttons to enter the administrator password, then

press

OK. The default password is 1111.

Make other selections as needed.

Accessing Xerox

CentreWare

Internet Services as a System Administrator

Before you begin:
•

Locate your printer IP address using the Configuration Report. For details, see

Printing the

Configuration Report

on page 16.

•

Ensure that TCP/IP and HTTP are enabled. If you disabled either of these protocols, enable them at

the control panel before accessing Xerox

CentreWare

Internet Services.

•

Many features in Xerox

CentreWare

Internet Services require an administrator user name and

password. The system administrator user name is

admin and the default password is 1111.

Accessing Xerox

CentreWare

Internet Services

At your computer, open a Web browser, in the address field, type the IP address of the printer, then press

Enter or Return.