Xerox Phaser 3330 User Guide
Note
The print resolutions are indicated for PostScript print drivers only. The only print-quality
mode for PCL is Enhanced.
mode for PCL is Enhanced.
Printing from a USB Flash Drive
You can print .pdf, .ps, .pcl, .prn, .tiff, and .xps files directly from a USB Flash drive.
Note
If USB ports are disabled, you cannot use a USB card reader for authentication, to update
the software, or to print from a USB Flash drive.
the software, or to print from a USB Flash drive.
The system administrator must set up this feature before you can use it. For details,
refer to the System Administrator Guide at
refer to the System Administrator Guide at
.
To print from a USB Flash drive:
1. Insert your USB Flash drive in a USB port on the printer.
1. Insert your USB Flash drive in a USB port on the printer.
The Print from USB choice is highlighted on the control panel display.
2. Press the Right arrow button.
3. To scroll through the list and locate the printable file, use the Up/Down arrow buttons.
4. With the file you want to print highlighted, press the OK button.
5. Select the number of copies, and press the OKOK button.
6. Highlight the tray selection and press the OK button.
3. To scroll through the list and locate the printable file, use the Up/Down arrow buttons.
4. With the file you want to print highlighted, press the OK button.
5. Select the number of copies, and press the OKOK button.
6. Highlight the tray selection and press the OK button.
5-7
Xerox
®
Phaser
®
3330 Printer
User Guide
Printing