Xerox Phaser 3330 User Guide
Condensation has Formed Inside the Printer
Moisture can condense inside a printer where the humidity is above 85% or when a cold
printer is located in a warm room. Condensation can form in a printer after it has been
sitting in a cold room that is heated quickly.
printer is located in a warm room. Condensation can form in a printer after it has been
sitting in a cold room that is heated quickly.
Solutions
Probable Causes
• Allow the printer to acclimate for several
hours before operation.
• Allow the printer to operate for several hours
at room temperature.
The printer has been sitting in a cold room.
• Reduce the humidity in the room.
• Move the printer to a location where the
• Move the printer to a location where the
temperature and relative humidity are
within the operating specifications.
within the operating specifications.
The relative humidity of the room is too high.
Paper Jams
Minimizing Paper Jams
The printer is designed to function with minimal paper jams using Xerox supported
paper. Other paper types can cause jams. If supported paper is jamming frequently in
one area, clean that area of the paper path.
paper. Other paper types can cause jams. If supported paper is jamming frequently in
one area, clean that area of the paper path.
The following can cause paper jams:
• Selecting the incorrect paper type in the print driver.
• Using damaged paper.
• Using unsupported paper.
• Loading paper incorrectly.
• Overfilling the tray.
• Adjusting the paper guides improperly.
• Using damaged paper.
• Using unsupported paper.
• Loading paper incorrectly.
• Overfilling the tray.
• Adjusting the paper guides improperly.
Most jams can be prevented by following a simple set of rules:
• Use only supported paper. For details, see Supported Paper on page 48.
• Follow proper paper handling and loading techniques.
• Always use clean, undamaged paper.
• Avoid paper that is curled, torn, moist, creased, or folded.
• To separate the sheets before loading into the tray, fan the paper.
• Observe the paper tray fill line; never overfill the tray.
• Follow proper paper handling and loading techniques.
• Always use clean, undamaged paper.
• Avoid paper that is curled, torn, moist, creased, or folded.
• To separate the sheets before loading into the tray, fan the paper.
• Observe the paper tray fill line; never overfill the tray.
7-5
Xerox
®
Phaser
®
3330 Printer
User Guide
Troubleshooting