Xerox Phaser 540 Leaflet
3
Printing From a PC
3-20
Phaser 540 Drivers and Utilities
Using the PC utility files
The utility files change the way the printer operates. To use the files, send
them to the printer from the communications port your printer is
connected to. You can use either the DOS method or the Windows method
described in the following topics.
them to the printer from the communications port your printer is
connected to. You can use either the DOS method or the Windows method
described in the following topics.
Downloading files from DOS
You can use the DOS
COPY command to download PostScript files to
the printer.
1.
Locate the files you want to use on the Tektronix Windows 3.1
Driver and Printer Utilities diskette. You can copy the files to
your computer's hard disk, or use the files directly from the
diskette.
Driver and Printer Utilities diskette. You can copy the files to
your computer's hard disk, or use the files directly from the
diskette.
2.
Use the DOS
COPY command to send the desired file to the
printer. For example, to reset the printer, you would send the
RESET.PS file to the printer.
RESET.PS file to the printer.
If your printer is connected to the parallel (LPT) port, type the
following command (where
following command (where
x is 1, 2, or 3):
COPY RESET.PS LPT
x:
If your printer is connected to the optional serial (COM) port, type
the following command (where
the following command (where
x is 1, 2, or 3):
COPY RESET.PS COM
x:
If your printer is connected to an optional Novell or TCP/IP
network, you should follow the instructions provided with your
network software.
network, you should follow the instructions provided with your
network software.