Xerox Phaser 300X Installation Guide

When prompted, do one of the following.  

■

 Type in the CD-ROM 

drive location.  Click OK; the Select Driver dialog box appears.  

■

If you are using an edited copy of the PRINTER.INF file from 
Step 2:  

 Type in the disk drive location of the diskette.  Click OK; 

the Select Driver dialog box appears.  

Under Printer Driver, choose your Phaser 300X printer from the 
list, then click OK.  

■

Select Tektronix Phaser 300X if you have the standard version of 
the printer.

■

Select Tektronix Phaser 300X Extended if you have the printer’s 
extended features option.

In the Windows NT Setup dialog box, type in the same path you 
used in Step 7 (for example, B:).   Click Continue; the Noncritical 
Error

 dialog box appears.

When you are prompted for the location of the PSCRPTUI.DLL file 
and the PSCRIPT.DLL file, click Ignore.  (These files were installed 
in the procedure in Step 4 or were already installed.)   

When the Create Printer dialog box appears, fill in the other fields 
as desired, then click OK; the PostScript Printer Setup dialog box 
appears.  

Select options in the PostScript Printer Setup dialog box.  
Enabling the Use Printer Halftoning option is recommended.  
Then click OK;  the Windows NT Setup dialog box appears.