Xerox digital BookMark System User Guide

1.  Log on to the server or workstation as an administrator and close all applications. 

2. Select 

[Start:Settings:Printers]. 

3.  Right-click on the Document Centre printer object and click Delete. 

4. Click 

Yes to confirm you want to delete the printer. 

Note: delete all printer objects associated with that printer driver. Repeat steps 3 and 
4 for any additional printer driver objects. 

5.  Reboot the workstation or server. Continue with the procedure in the section 

“Reinstall the Deleted Printers.” 

1.  Log on to the server or workstation as an administrator and close all applications. 

2. Select 

[Start:Settings:Printers]. 

3.  Right-click on the Document Centre printer object and click Delete. 

4. Click 

Yes to confirm you want to delete the printer. 

Note: delete all printer objects associated with that printer driver. Repeat steps 3 and 
4 for any additional printer driver objects. 

5. Click 

Start. 

6. Select 

Run. 

7.  In the field type: cmd and click OK. A DOS window appears. 

8.  At the c: prompt type net stop spooler and press Enter. The print spooler closes 

down. 

9.  At the c: prompt type net start spooler and press Enter. The print spooler restarts. 

10.  Close the DOS window. 

11.  Access the Printers folder and select [File>Server Properties]. 

12. Select the Drivers tab and click on the listing of the print object you just deleted. 

13. Click Remove then click Close. 

The driver is successfully deleted. 

 To either upgrade or change the PDL of an NT Enhanced kernel mode driver, 

DO NOT click New Driver (located on Advanced tab in Windows 2000/XP/2003) or New 
Driver (located on the General tab in Windows NT) in the driver’s Properties in the 
Printers folder! 

1. Access 

the 

Printers folder and open the Add Printer wizard. 

2.  Select the type of network, either Local printer or Network printer. 

3.  At the prompt to install the printer driver on your local machine, select Have Disk. 

Browse to the location of your printer driver files and select the correct .INF file. Click 
OK. Follow the instructions provided by the Add Printer Driver Wizard to complete 
the installation. 

Note: If you use the Add Printer Driver Wizard in a Windows NT server or 
workstation environment and a prompt appears to replace or keep the existing driver, 
always select Replace. 

4.  Specify if you want the Document Centre to be your default printer. Click Next. 

5.  Indicate if you want to print a test page. Click Next. 

Note: Do not use the 
delete procedures to 
remove corrupted print 
drivers. For uninstall 
procedures please see 
Customer Tip # 
dc00cc0115 Uninstalling 
Windows NT 4.0 and 
2000/XP Printer Drivers.