Xerox XDPE/400 (also known as EOMS I-Services) Support & Software User Guide
Introduction to XDPE/400 (9/2001)
1-1
1.
1
Getting Started
This chapter contains the following information:
•
•
A brief description of this manual and how to use it
•
An overview of AS/400 and XDPE/400 printing
•
The major features and functions offered by the Xerox Document
Print Executive for the IBM AS/400 (XDPE/400) software
The product information and instructions presented herein apply only to
XDPE/400 Version 2, Release 1, Modification 4.
NOTE: Xerox only supports the XDPE/400 features and functions
documented in the user documentation, XDPE/400 maintenance
bulletins, or help displays. Do not assume support is provided if it is
not explicitly documented.
Before you begin
Before you install the XDPE/400 software, make sure you meet the
installation requirements discussed in this manual. Before you begin to
use the XDPE/400 software, verify that XDPE/400 has been installed and
the IVP run successfully.
To install the XDPE/400 software, you must know how to use standard
To install the XDPE/400 software, you must know how to use standard
AS/400 CL commands, including CRTUSRPRF, ADDIRE, RSTLIB, and
RSTDLO. For information about these commands, refer to the OS/400 CL
Reference and the OS/400 Printer Device Programming.
In addition, you should be familiar with the basic AS/400 printing
In addition, you should be familiar with the basic AS/400 printing
concepts, the Xerox printers supported by XDPE/400, and any twinax
interface boxes you want to use with these Xerox printers. If you will be
using network-attached printers, you should also be familiar with basic
networking concepts. Refer to the OS/400 Printer Device Programming
for a complete explanation of the AS/400 printing process.