Xerox XDPE/400 (also known as EOMS I-Services) Support & Software User Guide
Printing Documents with XDPE/400 (9/2001)
13-19
XES command generation
Step 6.
Press ENTER. The system stores the SPECSTK packet in the XES
subfolder of XDPEFLR.
To use this packet to print the output of the application, you must change
the printer file for your application. Use the Change Xerox Printer File
(CHGXPRTF) command to specify the Direct method of printer control
generation and the name of your newly developed XES packet. Refer to
for more information.
Changing XES packets
Use the Change XES Packet (CHGXES) command to modify XES control
command packets created with the Create XES Packet command. You
can use this command on a command line or within a program to change
XES control command packets. If prompted, the existing values of the
XES control command packets are displayed.
NOTE: Press F10 to display the current values within the additional
parameters area. Press F9 to display a field without values or to
display all fields.
Follow these steps to modify an XES control command packet:
Step 1.
Enter CHGXES and press ENTER. The Change XES Packet menu
displays.
Change XES Packet (CHGXES)
Change XES Packet (CHGXES)
Change XES Packet (CHGXES)
Change XES Packet (CHGXES)
Type choices, press Enter.
Printer control packet name . . *NAME, F4 for list
Bottom
F3=Exit F4=Prompt F5=Refresh F10=Additional parameters F12=Cancel
F13=How to use this display F24=More keys
F13=How to use this display F24=More keys