Xerox XDPE/400 (also known as EOMS I-Services) Support & Software User Guide
Printing Documents with XDPE/400 (9/2001)
26-19
Troubleshooting
Multiple copy jobs print incorrectly when using trailer pages
If one of these conditions exist:
•
•
You are using trailer pages with the Direct or Combined method, and
specify the VIPP SETCYCLECOPY command either in the separator
page JDT (XDPSPR.JDT) or a user-defined JDT.
•
You are using trailer pages with the Indirect or Combined method
and specify the COPIES spool file attribute.
VIPP may ignore VIPP commands once the first copy is generated with a
trailer page. For example, if you specified both the VIPP
SETCYCLECOPY and PORT commands in XDPSPR.JDT but indicated a
landscape orientation for the data stream, the first copy will print in the
correct orientation for the banner, job, and trailer pages. All subsequent
copies may print in portrait orientation for the banner, data, and trailer
pages.
This situation occurs only when using trailer pages on multiple copy jobs.
This situation occurs only when using trailer pages on multiple copy jobs.
To resolve this situation, use one of these methods when generating
multiple copy print jobs:
•
•
Specify the Process separator page (BANNER) Monitor Queue
parameter to not generate trailer pages for multiple copy print jobs.
Specify either the *YES or *NO option; do not use either the *BOTH
or *TRLR option.
•
Remove the SETCYCLECOPY command from the separator page
JDT (XDPSPR.JDT).
NOTE: If you change either XDPSPR.JDT or the user JDT, you must
download the new version to the /usr/xgfc/jdtlib/ directory on the
printer controller before your changes will be in effect. Refer to
for instructions on downloading JDTs.