Xerox DocuTech 6100 Production Publisher User Guide

Page of 37
 
DOCUSP 4.1 
 
Nuvera Stacker/Finisher Script 
For the Nuvera family of printers, you must use the following 
script to set up Stackers and/or Finishers: 
1.  Open a terminal window. 
2.  Login as root. 
3. Type cd /opt/XRXnps/bin/DFA_IsStacker
4. Press <Enter>. 
5. Type ./set –f 0 OR ./set –f 1. Use the value 0 if the 
attached DFA device is a finisher, or use the value of 1 if 
the attached DFA device is a stacker. Note that there are 
spaces before and after the –f switch. 
6. Restart DocuSP. 
NOTE: This setting is lost on an upgrade or a scrape 
install and must be recreated using this procedure. 
 
LPR gateway behavior for document title 
Prior to DocuSP 4.0, the controller applied the LPR gateway 
filename to submitted documents as opposed to the internally 
set document name.  Starting with DocuSP 4.0, the controller 
applies the internal document name to the job. 
To set the DocuSP to the pre-4.0 behavior, run the following 
script:  
1.  Open a terminal window. 
2.  Login as root. 
3. Type enablePre40LPRBehavior 
4. Press <Enter>. 
5.  To disable the pre-4.0 LPR behavior, type 
disablePre40LPRBehavior 
6. Restart DocuSP. 
NOTE: A document name set in the job ticket has a higher 
precedence than the LPR gateway and internal document 
attributes.  
XEROX DOCUMENT SERVICES PLATFORM SERIES                                                                                   27 
GETTING STARTED