Xerox DocuTech 6100 Production Publisher Leaflet
Printing
4-4
System Guide
As an alternative, ASCII files can be identified as PCL and
sent through the PCL decomposer. The PCL decomposer
does provide some additional capabilities that can be used to
modify ASCII files as desired.
To force ASCII files to use the PCL decomposer, change the
file format in Job Manager. This can also be done by
changing the queue default document property from ASCII to
PCL.
sent through the PCL decomposer. The PCL decomposer
does provide some additional capabilities that can be used to
modify ASCII files as desired.
To force ASCII files to use the PCL decomposer, change the
file format in Job Manager. This can also be done by
changing the queue default document property from ASCII to
PCL.
setpclcontrol utility
The setpclcontrol utility offers the following user controls:
•
•
Set the site default for the PCL decomposer line
termination. Setting these options allows both native PCL
files and ASCII streams forced through the PCL
decomposer to be conditioned with various combinations
of carriage returns (CR), line feeds (LF), and form feeds
(FF). Mainframe and UNIX environments typically require
some form of CR/LF/FF adjustment.
termination. Setting these options allows both native PCL
files and ASCII streams forced through the PCL
decomposer to be conditioned with various combinations
of carriage returns (CR), line feeds (LF), and form feeds
(FF). Mainframe and UNIX environments typically require
some form of CR/LF/FF adjustment.
•
Set a custom paper size to map to the PCL escape
sequence esc|101A (which denotes print on custom stock
size).
HP printers generally respond to this command by
imaging an area of 11.7 x 17.7 inches and then printing
the image, centered, on whatever stock is supplied by the
operator. The setpclcontrol utility allows you to specify a
single image and paper size to correspond with this
escape sequence.
NOTE: This utility is now covered on the DocuSP
interface. Click the PCL tab and make selections to Line
Termination.
sequence esc|101A (which denotes print on custom stock
size).
HP printers generally respond to this command by
imaging an area of 11.7 x 17.7 inches and then printing
the image, centered, on whatever stock is supplied by the
operator. The setpclcontrol utility allows you to specify a
single image and paper size to correspond with this
escape sequence.
NOTE: This utility is now covered on the DocuSP
interface. Click the PCL tab and make selections to Line
Termination.
setlp/lprcopycount utility
The setlpcopycount utility allows the DocuSP customer to
modify how the lp/lpr gateway handles a copy count of one.
Beginning with DocuSP version 1.41.06, the default setting
ignores a copy count of one placed on the job by the lp/lpr
submission protocol. This allows the internal copy count set
by the PDL to take precedence.
The following utility allows a customer to return the DocuSP
to its original behavior, that is, either imply a copy count of
one when none is specified or honor a copy count of one if
specified on the command line. This copy count of one takes
precedence over the copy count set by the PDL.
modify how the lp/lpr gateway handles a copy count of one.
Beginning with DocuSP version 1.41.06, the default setting
ignores a copy count of one placed on the job by the lp/lpr
submission protocol. This allows the internal copy count set
by the PDL to take precedence.
The following utility allows a customer to return the DocuSP
to its original behavior, that is, either imply a copy count of
one when none is specified or honor a copy count of one if
specified on the command line. This copy count of one takes
precedence over the copy count set by the PDL.