Xerox DocuTech 6100 Production Publisher User Guide
Solutions in Alphabetical Order
DT6180 HandyBook 113
Clear the Paper Jam in Areas 7, 6, and 5
Clear Jams in order from areas 7, 6, and then area 5.
1. Open the Processor Doors using the handle above Paper Tray 1.
To clear area 7:
2. Just below the top of the machine, behind the left Processor Door, is a green handle with an arrow
pointing up and to the left. Lift up and hold the green handle in this position.
3. Below the green handle is a green knob. Rotate the knob to the left and remove any paper in this
area.
NOTE: If paper falls into the machine, and cannot be retrieved, a service call will need to be
placed. This happens occasionally but not normally.
NOTE: If paper falls into the machine, and cannot be retrieved, a service call will need to be
placed. This happens occasionally but not normally.
4. Lower the green handle. Make sure that the area 7 baffle is lowered and latched securely.
To clear area 6:
5. Pull out the Fuser Assembly. Grasp the square gray handle with a horizontal green stripe and
rotate it out and up at the same time. The handle is located above and to the left of Paper Tray 1.
CAUTION: The Fuser is very hot!
6. Remove any paper in the Fuser area. Make sure to look at the bottom of the Fuser Assembly for
any trapped sheets of paper.