Xerox DocuTech 6100 Production Publisher User Guide
Perform Printer Functions
DT6180 HandyBook 141
7. Perform Printer Functions
These Printer Functions detail instructions are all available at
www.support.xerox.com
. 1-10 are included in this book.
1. How To Add a Font to the DocuSP Controller
2. How To Allow Main, Aux, Auto, and Unspecified to be Used as Stock Names
3. How To Backup VIPP Files Before an Upgrade
4. How To Check the Systems Queue Output Location and Finishing Selections
5. How To Clear a Faulted Job
6. How To Create a New Queue
7. How To Delete a Job in Job Manager
8. How To Disable Stock Size Checking
9. How To Display all Active Machine Faults
10. How To Enable an On-line External Finisher
11. How To Enable or Disable the Banner Page
12. How To Enable or Disable the Solaris Screen Saver
13. How To Find DocuSP Host Name and IP Address
14. How To Find the DocuSP Software Version
15. How To Format the DocuSP to use a Universal Serial Bus (USB) Flash Drive
16. How To Hold a Job in the Job Queue
17. How To Modify the Date and Time on the Controller
18. How To Modify the Default router / Gateway
19. How To Modify the Job Manager View to All But Completed Jobs
20. How To Modify the Paper Tray Programming
21. How To Modify the Stitch Position
22. How To Open Administration
23. How To Open Job Manager
24. How To Open Printer Manager
25. How To Open Queue Manager
26. How To Override the Stitcher Limit
27. How To Power OFF the DocuSP Controller
28. How To Power On the DocuSP Controller
29. How To Power On the DocuSP Printer
30. How To Print a Job With a Status Message of 'Successfully Completed'
31. How To Print a Job With a Status of 'Held by System'
32. How To Print Files from Compact Disk (CD) or Floppy
33. How To Print the Accounting Log
34. How to Purge the Accounting Log
35. How to Reboot the DocuSP Controller
36. How To Release a Job or All Jobs
37. How To Restart the DocuSP Software
2. How To Allow Main, Aux, Auto, and Unspecified to be Used as Stock Names
3. How To Backup VIPP Files Before an Upgrade
4. How To Check the Systems Queue Output Location and Finishing Selections
5. How To Clear a Faulted Job
6. How To Create a New Queue
7. How To Delete a Job in Job Manager
8. How To Disable Stock Size Checking
9. How To Display all Active Machine Faults
10. How To Enable an On-line External Finisher
11. How To Enable or Disable the Banner Page
12. How To Enable or Disable the Solaris Screen Saver
13. How To Find DocuSP Host Name and IP Address
14. How To Find the DocuSP Software Version
15. How To Format the DocuSP to use a Universal Serial Bus (USB) Flash Drive
16. How To Hold a Job in the Job Queue
17. How To Modify the Date and Time on the Controller
18. How To Modify the Default router / Gateway
19. How To Modify the Job Manager View to All But Completed Jobs
20. How To Modify the Paper Tray Programming
21. How To Modify the Stitch Position
22. How To Open Administration
23. How To Open Job Manager
24. How To Open Printer Manager
25. How To Open Queue Manager
26. How To Override the Stitcher Limit
27. How To Power OFF the DocuSP Controller
28. How To Power On the DocuSP Controller
29. How To Power On the DocuSP Printer
30. How To Print a Job With a Status Message of 'Successfully Completed'
31. How To Print a Job With a Status of 'Held by System'
32. How To Print Files from Compact Disk (CD) or Floppy
33. How To Print the Accounting Log
34. How to Purge the Accounting Log
35. How to Reboot the DocuSP Controller
36. How To Release a Job or All Jobs
37. How To Restart the DocuSP Software
38.
How To Setup Default Paper for the Banner Page