Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook                                                                                                                   145 

 

NOTE: Before you begin you must be logged on as an Administrator. See the 
Related Items below for additional information. 
 
If you are using DocuSP version 3.x:  

1.  From the DocuSP Print Services window or the DocuSP for DocuTech 2000 

Series 61xx window, select [Queue Manager]. The Queue Manager window 
will be displayed.  

2.  Double-click on the queue you are looking at.  
3.  Select the [Output Tab].  
4. Under the Output Location section, select [System Specified].  
5. Under the Finishing section, select the Finisher / Booklet Maker you want to 

send the job to.  

6.  Make sure there is no check mark in the box next to [Override]. You may 

need to click on the box to remove the check mark.  

7.  Select [OK].  

If you are using DocuSP version 2.x: 

1.  From the DocuSP Print Services window, select [Queue Manager]. The 

Queue Manager window will be displayed.  

2.  Double-click on the queue you want to view to open the queue properties.  
3. Under Extended Options, select [Output...].  
4.  Set the output to [System Specified]. Output Location is on the left-hand side. 
5. Under the Finishing section, select the Finisher / Booklet Maker you want to 

send the job to.  

6.  Make sure there is no check mark in the box next to [Override]. You may 

need to click on the box to remove the check mark.  

7.  Select [OK] twice.