Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook                                                                                                                   151 

 

NOTE: Examples of external Finishers include the Signature Booklet Maker (SBM), 
Signature Booklet Maker II (SBMII), Borg, High Capacity Stacker (HCS), and 
Document Booklet Systems (DBS). Before you begin, make sure you are logged on 
as System Administrator.  
 

Click here if you are using DocuSP version 2.x or below. 

 

 
If you are using DocuSP version 3.X:  

1.  In the DocuSP Print Services window, or the DocuSP for DocuTech 2000 

Series 61xx window, select [Printer Manager]. The Printer Manager window 
will be displayed.  

2.  Select the [Finishing] tab. The Finishing tab will be displayed. In the External 

Finishers section a list will be displayed with all your external Finishers.  
 
NOTE: Only one external Finisher can be active at a time. The Finisher you 
want to use must have the word 'enabled' in the Status column and show 
'On-line' in the On-line column.  

3.  If there are no Finishers enabled and on-line, continue with steps 4 and 5. If 

there is a Finisher enabled and on-line that you do not wish to use and you 
need to enable and on-line a different Finisher, perform steps 6-9.  

4.  Right-click on the Finisher you want to use, then select [On-line] from the 

drop-down menu. The word 'on-line' will be displayed in the On-line column.  

5.  Right-click on the Finisher you want to use, then select [Enable] from the 

drop-down menu. The word 'enabled' will be displayed in the Status column.  

6.  Right-click on the Finisher that you do not want to use, then select [Disable] 

from the drop-down menu. The word 'disabled' will be displayed in the Status 
column.  

7.  Right-click on the Finisher that you do not want to use, then select [Off-line] 

from the drop-down menu. The word 'off-line' will be displayed in the On-line 
column.  

8.  Right-click on the Finisher you want to use, then select [On-line]. The word 

'on-line' will be displayed in the On-line column.  

9.  Right-click on the Finisher you want to use, then select [Enable]. The word 

'enable' will be displayed in the Status column.  

If you are using DocuSP software version 2.X:  

1.  In the DocuSP Print Services window, or the DocuSP for DocuTech 2000 

Series 61xx window, select [Printer Manager]. The Printer Manager window 
will be displayed.  

2.  Click on [Options], then select [Finishing] from the menu. The Finishing 

screen will be displayed.  

3.  Select the [On-Line Finishers] tab. The screen will display a list of all your