Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook                                                                                                                   153 

 

NOTE: You must be logged in as System Administrator or Trusted User to perform this task.  
 
To Add Binding to a job in the Job Queue using DocuSP software version 3.x:  

1.  From the DocuSP for DocuTech 2000 Series 61xx window, select [Job Manager].  
2.  Right-click the job you want to add binding to. A menu will be displayed.  
3.  Select [Properties]. A Job Properties window will be displayed.  
4.  Select the [Output] tab.  
5. Under 

the 

Finishing section, select [Bind] from the drop-down menu.  

6. Select 

[OK]. 

 

To Add Binding to a job in the Job Queue using DocuSP software version 2.x:  

1.  From the DocuSP Print Services window, select [Job Manager].  
2.  Select the job you want to add binding to.  
3.  Select [Properties] from the toolbar. A menu will be displayed.  
4.  Select [Output]. An Output window will be displayed.  
5. Under 

the 

Finishing section, select [Bind] from the drop-down menu.  

6. Select 

[OK]. 

 

 

 
NOTE: Before you begin you must be logged on as a System Administrator or Trusted User.  
 
To enable Duplex Mode:  

1.  If you are using DocuSP software version 2.x or below, open the DocuSP Print Services 

window, and select [Print Manager]. The Print Manager window will be displayed.  
 
If you are using DocuSP software version 3.x, open the DocuSP for DocuTech 2000 
Series 61xx window, and select [Printer] from the toolbar. A menu will be displayed. Skip 
to step 3.  

2.  Select [Options] from the toolbar. A menu will be displayed.  
3.  Select [Switches] from the menu. The Switches window will be displayed.  
4. Under 

Sides Imaged, select [2-Sided]. A check mark will be displayed in the box when 

the feature is enabled.  

5.  Select [OK] to save changes and exit.