Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook                                                                                                                   154 

 

 
NOTE: Before you begin you must be logged on as a System Administrator or Trusted User.  
 
To enable Offset Stacking using DocuSP software version 3.x or above:  

1.  From the DocuSP for DocuTech 2000 Series for 61xx window, select [Printer Manager]. 

The Printer Manager window will be displayed.  

2.  Select the [Stacking] tab.  
3.  Select [Settings]. A Settings for All Stackers window will be displayed.  
4.  Select the boxes for the options [Collated], [Uncollated] and [Within Stack]. A check mark 

will be displayed in the box if they are enabled.  

5.  Set how often you want the sheets to offset, under Offset Page Boundary (between 8 to 

100).  

6. Select 

[Ok]. 

To enable Offset Stacking using DocuSP software version 2.x or below:  

1.  From the DocuSP Print Services window, select [Printer Manager]. The Print Manager 

window will be displayed.  

2.  Select [Options] on the toolbar. A menu will be displayed.  
3.  Select [Stacking] from the menu. The Unfinished Offset Stacking window will be 

displayed.  

4.  Select the boxes for the options [Collated], [Uncollated] and [Within Stack]. A check mark 

will be displayed in the box if they are enabled.  

5.  Set how often you want the sheets to offset, under Offset Page Boundary (between 8 to 

100).  

6.  Select [Ok].  
7. Select 

[Close].