Xerox DocuTech 6100 Production Publisher User Guide
Programming Features
DT6180 HandyBook 157
Program Tabs
NOTE: Jobs must be in a Held or Pending status to perform this function.
DocuSP 3.x
If you are using DocuSP software version 3.x or above:
1. In the DocuSP for DocuTech 2000 Series 61xx window, select [Job Manager].
2. Right-click the desired job. A menu will be displayed.
3. Select [Properties] from the menu. A Job Properties window will be displayed.
4. Select the [Exception Page] tab.
5. Select the [Add Exceptions] button in the lower left side. A Job Exceptions window will be
2. Right-click the desired job. A menu will be displayed.
3. Select [Properties] from the menu. A Job Properties window will be displayed.
4. Select the [Exception Page] tab.
5. Select the [Add Exceptions] button in the lower left side. A Job Exceptions window will be
displayed.
6. Select the [Stock] tab if it not already displayed in the window.
7. Enter the page range in the From and To fields.
8. Select the [Size], [Color] and [Type].
7. Enter the page range in the From and To fields.
8. Select the [Size], [Color] and [Type].
NOTE: Standard tab size is 229 mm x 279 mm (9 x 11 inches). Standard tab type is Precut Tab
with a sequence of five.
9. Select [Apply].
10. Repeat steps 6 through 9 until all tabs have been added.
11. After all tabs have been added select [OK].
10. Repeat steps 6 through 9 until all tabs have been added.
11. After all tabs have been added select [OK].
NOTE: You will also need to add tab stock to the paper tray and set up that tray with the stock you
programmed.
DocuSP 2.x
To insert tabs using DocuSP software version 2.x and below:
To insert tabs using DocuSP software version 2.x and below:
1. In the DocuSP Print Services window, select [Job Manager].
2. Select the desired job.
3. Select [Properties] from the toolbar. A menu will be displayed.
4. Select [Special Pages].
5. Select the [Exception Pages] tab.
6. Select [Add] to add a tab.
7. In the Paper Stock window, enter the page range in the From and To fields.
8. Select the Size, Color and Type.
2. Select the desired job.
3. Select [Properties] from the toolbar. A menu will be displayed.
4. Select [Special Pages].
5. Select the [Exception Pages] tab.
6. Select [Add] to add a tab.
7. In the Paper Stock window, enter the page range in the From and To fields.
8. Select the Size, Color and Type.
NOTE: Standard tab size is 229 x 279 mm (9 x 11 inches). Standard tab type is Precut Tab with a
sequence of five.
9. Select [Apply].
10. Repeat steps 6 through 9 until all tabs have been added.
11. After all tabs have been added, select [Ok].
10. Repeat steps 6 through 9 until all tabs have been added.
11. After all tabs have been added, select [Ok].
NOTE: You will also need to add tab stock to the paper tray and set up that tray with the stock you
programmed.