Xerox DocuTech 6100 Production Publisher User Guide
Replacing Consumables
DT6180 HandyBook
30
7. Open a new box of Fuser Agent and remove the bottle.
CAUTION: Make sure you use the Fuser Agent specific to the machine model you
are using. Fuser Agent for the machine model DocuTech 90 is not compatible with
the DocuTech 135.
8. Remove the cap from the bottle of the Fuser Agent.
9. Carefully pour the Fuser Agent into the reservoir until the level reaches the Max line.
9. Carefully pour the Fuser Agent into the reservoir until the level reaches the Max line.
CAUTION: There is an anti-splash seal in the reservoir. To avoid damage to this
seal, do not push the Fuser Agent bottle into the reservoir with excessive force.
WARNING: If any Fuser Agent is spilled onto the floor, it must be removed
immediately as the floor can become slippery.
10. Replace the reservoir cap.
11. Push the Fuser Agent reservoir in to the machine until it stops.
12. Push the Fuser Drawer all the way into the machine until the drawer latches into place.
13. Close the Processor Doors. The Fuser Agent message will disappear after approximately
11. Push the Fuser Agent reservoir in to the machine until it stops.
12. Push the Fuser Drawer all the way into the machine until the drawer latches into place.
13. Close the Processor Doors. The Fuser Agent message will disappear after approximately
20 prints are made.