Xerox DocuTech 6100 Production Publisher User Guide
Machine Maintenance
DT6180 HandyBook
43
Adjusting for Paper Curl - Adjusting the Decurler Lever
1. Open the right door of the processor.
2. Locate the decurler lever in area 7 of the paper path, as shown below.
2. Locate the decurler lever in area 7 of the paper path, as shown below.
3. If the print curl is +2 or more, move the green decurler lever to the right.
4. If the print curl is -3 or more, move the green decurler lever to the left.
5. If the decurler adjustment does not eliminate the paper curl problem, or for other curl
4. If the print curl is -3 or more, move the green decurler lever to the left.
5. If the decurler adjustment does not eliminate the paper curl problem, or for other curl
problems, turn the stack of paper over in the paper tray.
6. If there is still a curl problem, perform steps 1 to 4 again.
NOTE: A final solution to the curl problem may be to load a new ream of paper.
7. Close the processor door.