Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook 

49  

 
If you are using software version 3.x and above:  

1.  From the DocuSP for DocuTech 2000 Series 61xx window, select [Printer Manager]. The 

Printer Manager window will be displayed.  

2.  Select the [Stacking] tab.  
3.  Select the [Setting] button on the lower, right-hand side of the window. The Setting for All 

Stackers window will be displayed.  

4. Under 

Bindexer Capacity use the [Up] and [Down] arrows to modify the capacity or 

enter a new bindexer capacity.  

5.  Select [OK] to save the selection. 

If you are using software version 2.x and below:  

1.  From the DocuSP Print Services window, select the [Printer Manager] button. The Printer 

Manager window will be displayed.  

2.  Select [Options] from the toolbar. A menu will be displayed.  
3.  Select [Finishing] from the menu. The Finishing window will be displayed.  
4.  Select the [Finishing tab.  
5. Under 

the 

Stacker Set Up section, use Slide to Select New Bindexer Number.  

6.  Select [OK] to save the selection.  

 
NOTE: You must be logged on as Trusted User or System Administrator to perform this task. 
Only Trusted Users or System Administrators have access to changing the Image Quality 
settings.  
 
To modify the Lighter / Darker Setting using DocuSP software version 3.x or above:  

1.  In the DocuSP for DocuTech 2000 Series for 61xx window, select [Printer Manager]. The 

Print Manager window will be displayed.  

2.  Select the [Image Quality] tab in the Printer Manager window. The Image Quality window 

will be displayed.  

3.  Select [Printer Darkness].  
4. Make 

sure 

the 

Darkness Mode is set for Normal Darkness, and select a lighter or darker 

shade of gray depending on the desired effect.  

5. Select 

[OK]. 

 

6.  When an Information window is displayed stating 'The change to Darkness will take effect 

on the next set/subset to be printed,' select [OK].  

 

To modify the Lighter / Darker Setting using DocuSP software version 2.x or below:  

1.  In the DocuSP Print Services window, select [Printer Manager]. The Print Manager 

window will be displayed.  

2.  Select [Options] from the toolbar. A menu will be displayed.  
3.  Select [Image Quality] from the menu. The Image Quality window will be displayed.  
4.  Select [Printer Darkness].  
5. Make 

sure 

the 

Darkness Mode is set for Normal Darkness, and select a lighter or darker 

shade of gray depending on the desired effect.  

6.  Select [Apply].