Xerox DocuTech 6100 Production Publisher User Guide
Solutions in Alphabetical Order
DT6180 HandyBook 77
Clean the Front Stack (Q1227), Rear Stack Height (Q1218), and
Set Path (Q1221) Sensors
Set Path (Q1221) Sensors
The Q1227, Q1218, Q1221 Sensors are on the Stacker Tray.
NOTE: Q1218 is a dual sensor containing Q1218 and Q1227.
1. Fold a Piece of A4 (216 mm x 279 mm / 8.3 x 11.7 inch) or 8.5 x 11 inch paper.
2. Open the Finisher Front Doors. The door is located above and to the right of Paper Tray 3.
2. Open the Finisher Front Doors. The door is located above and to the right of Paper Tray 3.
3. Open the Finisher Top Cover.
4. If present, the bypass transport must be raised to gain access to the sensors.
WARNING: You may have to hold the bypass transport in the raised position if it lowers into
the original position.
Q1227 Front Stack Height Sensor: