Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook                                                                                                                   97 

13.  Grasp the handle, push down on the top of the handle with your thumb, and then pull the baffle 

open toward the right.  

14.  Remove any paper under the baffle.  
15.  Close the baffle.  
16.  Close the Finisher Top Cover. 

 

 
NOTE: Even if paper is not visible, go through the sequence to clear the paper jam. Carefully inspect the 
rollers for any debris or torn pieces of paper. When clearing misfeeds, make sure a full sheet of paper is 
cleared and there are no pieces of paper left in the machine. 
 
To clear area 13:  

1.  Open the Finisher Top Cover by lifting the handle to release the cover. Push the cover open all the 

way. 
 

 

2.  If present, the bypass transport must be raised to gain access to the sensors.  

 

 

 
WARNING: You may have to hold the bypass transport in the raised position if it lowers into 
the original position.  

3.  On the left side of the Finisher area you will see a mechanical assembly. There is a green handle 

on the right side of this assembly. Grasp the handle and push down on the top of the handle with 
your thumb, then pull the baffle open toward the right.