Xerox SmartSend Support & Software Installation Guide
4-14
Site Configuration
8
If a device configuration fails due to a temporary communication error, you may attempt to reconfigure
the device again. See Device Communication and Configuration Issues on page 7-6 for more
information.
the device again. See Device Communication and Configuration Issues on page 7-6 for more
information.
9
If a device cannot be configured using the above procedures, a manual configuration may be required.
See Manually Configure This Device on page 4-22 for more information.
See Manually Configure This Device on page 4-22 for more information.
Deleting Devices
This option deletes any device that is selected on the Manage Xerox Devices page. When a device is deleted,
any Device Scan Templates that have been published to the device are also deleted. Workflows are not
affected by this operation.
any Device Scan Templates that have been published to the device are also deleted. Workflows are not
affected by this operation.
To delete a device from the Xerox Multifunction Devices list:
1
From the Administration Home Page, click the View Xerox Devices link.
2
Identify the device(s) you would like to delete by selecting the check box to the left of each device Host
Name or IP Address.
Name or IP Address.
3
Click the Delete icon
located in the column on the right to delete an individual device, or the Delete
button that is located below the list if you need to delete several devices.
4
The Confirm Delete Device(s) dialog appears. Click OK.
5
The Delete Device(s) Status page appears. Click OK to return to the Manage Xerox Devices page. The
deleted device(s) will be removed from the Xerox Multifunction Devices list.
deleted device(s) will be removed from the Xerox Multifunction Devices list.
N
OTE
:
Keep in mind that the publications associated with a device will also be deleted, if the publications
do not reside on any other device(s).