Xerox Document Centre ColorSeries 50 Installation Guide
T
HE
D
OCUMENT
C
OMPANY
XEROX
Xerox Document Centre ColorSeries 50 LP/ST Microsoft
®
(SMB) Quick Install
3.
Using the keypad, enter your Access Number
and then press Enter on the Touch Screen.
The default Access Number is 11111. It may
have been changed by a System Administrator.
and then press Enter on the Touch Screen.
The default Access Number is 11111. It may
have been changed by a System Administrator.
4.
Press Machine Setup on the Touch Screen.
The list of available Items and their current
settings are displayed.
The list of available Items and their current
settings are displayed.
5.
Press IP Address in the Items list, or use the
scroll buttons to locate the IP Address field.
scroll buttons to locate the IP Address field.
6.
Press Change Settings on the Touch Screen.
7.
After entering the IP Address using the keypad,
press Save.
press Save.
8.
From the Items list, locate and set the Gateway
Address and Subnet (Mask) Address.
Address and Subnet (Mask) Address.
9.
If you are using Token Ring, also set the
Source Routing value.
Source Routing value.
10.
Press Close repeatedly until you exit the
Administration screens.
Administration screens.
11.
Power off and power on the printer. Allow a full
30 seconds between powering off and
powering on the printer. A Configuration Report
will print in approximately 5 minutes. The
information on the Configuration Report can be
very helpful in completing the network
installation and troubleshooting problems with
your printer.
30 seconds between powering off and
powering on the printer. A Configuration Report
will print in approximately 5 minutes. The
information on the Configuration Report can be
very helpful in completing the network
installation and troubleshooting problems with
your printer.
12.
Continue with
Step 2 Customize Printer
Connectivity Settings.
Step 2 Customize Printer Connectivity
Settings
Settings
If you use CentreWare Printer Admin Services:
1.
Install the Printer Admin Services software.
2.
Start the Printer Admin Services program.
From a workstation click Start > Programs >
Xerox CentreWare Color > Printer Admin
Services.
From a workstation click Start > Programs >
Xerox CentreWare Color > Printer Admin
Services.
3.
From the main Printer Admin Services window,
enter a printer name if you know it, or click the
down arrow to view and select a printer from
the drop-down list.
enter a printer name if you know it, or click the
down arrow to view and select a printer from
the drop-down list.
4.
Click OK and then click Settings.
5.
Click on the Network tab.
6.
Review the displayed settings and make any
changes, if necessary.
changes, if necessary.
7.
Click on the Microsoft Networks tab and then
review and edit any fields, as needed.
review and edit any fields, as needed.
This Quick Install Card describes the activities
needed to install the Document Centre ColorSeries 50
LP/ST in one of the following Microsoft (SMB)
networking environments:
needed to install the Document Centre ColorSeries 50
LP/ST in one of the following Microsoft (SMB)
networking environments:
•
Microsoft Windows NT 4.0 NetBIOS/NetBEUI
•
Microsoft Windows NT 4.0 NetBIOS/IP
•
OS/2 Warp NetBIOS/NetBEUI
•
OS/2 Warp NetBIOS/IP
Before You Start:
•
You must create a Host (or SMB) Name and
Workgroup. These should reside on an existing
domain.
Workgroup. These should reside on an existing
domain.
•
For a Windows NT installation, you must have
Microsoft TCP/IP Printing Services installed.
Microsoft TCP/IP Printing Services installed.
•
If you are running NetBIOS/NetBEUI, you must
use TCP/IP or NetWare for printer discovery.
use TCP/IP or NetWare for printer discovery.
•
Decide now if you will use CentreWare Internet
Services or CentreWare Printer Admin Services
to customize printer connectivity settings.
Services or CentreWare Printer Admin Services
to customize printer connectivity settings.
Step 1 Set Up the Printer
1.
Press the Administration button, located on
the printer Control Panel.
the printer Control Panel.
2.
Press Tools on the Touch Screen.
For assistance, contact your local Xerox Customer Support Center: USA: 1-800-821-2797 Canada: 1-800-939-3769
Bustled Controller, Part Numbers 97N00893 and 97N00894 are for use with Xerox Corp. Digital Color Product Model YFA-1.