Xerox Document Centre ColorSeries 50 User Guide
BASIC COPYING
4–20
DOCUMENT CENTRE CS 50 USER GUIDE
2
3
4
5
6
7
4
Auto Tray Switching - Tools Mode
The Auto Tray Switching feature enables the
copier/printer to switch to another paper supply
when a tray runs out of paper. Auto Tray
Switching is activated when Auto Paper Supply is
selected and your System Administrator has
enabled paper trays 1, 2, 3, and 4.
copier/printer to switch to another paper supply
when a tray runs out of paper. Auto Tray
Switching is activated when Auto Paper Supply is
selected and your System Administrator has
enabled paper trays 1, 2, 3, and 4.
NOTE: The trays must be loaded with the same
size paper in the same orientation (long edge feed
or short edge feed).
size paper in the same orientation (long edge feed
or short edge feed).
For example, trays 2 and 3 contain the same size
paper in the same orientation and the Tray 2
Paper Supply button on the Basic Copying tab of
the Touch Screen is selected. If, during a copy
job, Tray 2 should run out of paper, the copier/
printer will automatically begin drawing paper from
Tray 3.
paper in the same orientation and the Tray 2
Paper Supply button on the Basic Copying tab of
the Touch Screen is selected. If, during a copy
job, Tray 2 should run out of paper, the copier/
printer will automatically begin drawing paper from
Tray 3.
For further information on this feature, see the
System Administration Guide, chapter 3, “Tools
Mode.”
System Administration Guide, chapter 3, “Tools
Mode.”